Newsletter: Identifying Excess Water In Sewer Systems Is Critical (Indiana)

One of the wettest years in Indiana is behind us, but the full impact on your community’s sewers and wastewater treatment systems may not be known for weeks or months.

One thing is certain. Wet weather and high groundwater can raise havoc for Town and City officials trying to keep excess clear rainwater or groundwater from coming into the sewer system. That excess water can also be very expensive to handle because it uses capacity of the sewer piping and treatment system. If the sewers can’t handle the flows, backups into basements and overflows are possible.

Additionally, excess flows may affect the quality of treatment at your plant or cause overflows of partially treated wastewater to your nearby lake or river, creating health hazards and costly permit violations. Failure to get the water out of the system can force communities to install bigger sewers and expand the wastewater plant.


Accurately identifying the source of excess water, known as infiltration and inflow (I/I), in sanitary sewers can be frustrating, time-consuming and costly. But identifying the leaks is critical. Reducing your I/I can result in large overall savings in pipe size, future treatment plant capacity and operational costs.

Some of the tools used to locate I/I include performing manhole assessments, smoke testing, closed circuit televising (CTV) and mass flow monitoring (MFM).  

  • Manhole field inspections identify structural defects and leaks within the manholes. A comprehensive assessment can usually be completed at the top of the manhole without entry.
  • Smoke testing is a relatively fast, economical and effective method of identifying rainwater coming from cross connections. An odorless, nontoxic smoke is pumped into the sewer system to locate damaged or improper connections like a catch basin connected to the sanitary sewer or a broken sewer lateral clean-out cap.
  • Televising an entire sewer system can be expensive but televising a small amount at a time and prioritizing suspect areas provides insight into what causes any backups or blockages. The data can be stored in the sewer system Geographic Information System (GIS) and updated as you complete future inspections.
  • MFM is a cost-effective, specialized technique that uses flow monitors installed in many manhole locations. It is much less expensive than the cumbersome metering equipment used in the past and provides data at more locations compared to installation of a few expensive flow meters.

Fleis & VandenBrink (F&V) is the sole provider for MFM in Indiana and Michigan and has staff fully trained in the latest technology. The City of Huntington has used MFM to study the northern half of its collection system.

Read the full newsletter.